Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (1-1/8" OD, 3-1/2" CLR) Steel

Round Tube Die for 302 "One-Shot" Tube and Pipe Bender (1-1/8" OD, 3-1/2" CLR) SteelSpecs Outside Diameter of the Tubing (OD): 1 1 8" (28. 6 mm) Minimum Wall Thickness (DOM): 0. 083 (2. 1 mm) Minimum Wall Thickness (4130): 0. 083 (2. 1 mm) Minimum Wall Thickness (ERW): 0. 095 (2. 4 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3 1 2 (88. 9 mm) Maximum

Centerline Radius: 2-1/2” (63

Centerline Radius: 5” (127 mm)

This roll set will bend the following sizes of material: 1-3/4" x 1-3/4" Square

Steel U-Strap

Minimum Inside Radius: Approximately 70” (1778 mm)

Perfect for production applications

Rectangular Tubing

Nominal Pipe Size (Diameter Nominal): NPS 1-1/2 (DN 35)

Hole Saws Sold Separately

Maximum Outside Diamter (OD): 2" (50

Designed for a lifetime of constant use

10"-70" (Depending on the material)