CMT Ball End Router Bit Product Wattage_1.2 Dry 2+ hours between coats

Dry 2+ hours between coats and before topcoat in ideal conditions: 70°F/20°C

SAFETY TIPS: the router table fence must be at least 150mm (6") high

when used in pair with the bit 800

Formica 515 Graphite Grafix Colormatch Recipe is the following:

Decant leftovers to a smaller container when the finish is almost used up

CMT Ball End Router Bit Product Wattage_1.2 Dry 2+ hours between coatsSKU Diameter (D) Cutting Length (I) Total Length (L) Shank Diameter (S) Number of Cutting Edges (Z) Material (MAT) Rotation (RH LH) 868. 627. 11 1 2" 7 16" 2 1 4" 1 2" 2 HW RH 868. 658. 11 5 8" 9 16" 2 3 8" 1 2" 2 HW RH 868. 690. 11 3 4" 11 16" 2 1 2" 1 2" 2 HW RH 868. 754. 11 1" 59 64" 2 3 4" 1 2" 2 HW RH Cut channels for pipes or cables in one single pass using CMTs ball end bits. Reduce the stress on the bits by cutting a first groove with a